Low Voltage Four Pole Monoblock Transformer Bushing
UTEC LV,4P Monoblock bushing is designed, engineered and manufactured locally in Saudi Arabia, using the high-quality Class H Epoxy, Rated upto 1.1 kV, with current capacity starting from 1700A up to 2500 Amp, complying with BS 2562 & IEC 60137 standard and Saudi Electricity Company specification
Key Product Features
Application
Its widely used in equipment insulated with oil fluid, typical for transformers top or wall mounted type.
Specification and standards
UTEC Range of Bushings are available to meet the requirement of IEC 60137 generally and BS 2562 specifically
Routine Electrical Test
AC Power frequency withstand test including partial discharge test is measured at extinction with voltage and pd level recorded.
Routine test
All units undergo according to BS2562. 1. Visual inspection and dimensional check as per Clause 12.3.1 2. Thermal Stability test as per Clause 12.3.1 3. Oil Leakage Sample test as per Clause 12.3.2 4. Air leakage Sample Test as per Clause 12.3.3 5. Over Voltage Routine test as per IEC Clause 9.4 and table 3 6. Measurement of partial discharge as per IEC 60137 clause 9.5.
Product Traceability
All units are marked with unique serial number allowing full traceability
TECHNICAL DATA
